Why does the watch stop every hour?
This fault is generally caused by a problem with the core wheel or gear teeth. If it is an old watch, it is mostly related to the wear of the axle eye of the splint. The wear of the axle eye will cause the core wheel to tilt in the splint, which can easily lead to the front end of the minute hand and the dial. The characters or the hands indicating the seconds on the clock rub against each other, while the second hand and thin watches will rub against the inside of the watch glass.
Why does the watch jump to the calendar at noon？
If this happens, it only means that the way you adjust the meter is incorrect. There are 24 hours in a day, but the watch can’t distinguish day or night. The watch calendar is 24 hours, so if you directly adjust to the current time, you may encounter the situation of skipping the calendar at noon. Correct operation method: First, you need to avoid the restricted area of the calendar (8:00 pm to 2:00 am the next day), then push the crown back to the first gear, start to adjust the calendar, and adjust the calendar to the day before the current date. Then turn the head to the outermost to adjust the time, bring the calendar to the current day, and then adjust to the current time.
Is there a dust on the dial of the newly bought watch?
In fact, this is a normal phenomenon. With such a sophisticated mechanical device as a watch, it is inevitable to have it during assembly. Moreover, some dust may also get in during the wearing process, and sometimes it is really hard to prevent, which is why it needs to be cleaned regularly.
Why is the newly bought quartz watch out of power?
The battery life of a quartz watch is generally 1-2 years, which refers to a brand new battery life. The watch is installed with a battery at the factory and starts to go away. It will take some time from the factory to the sale to you, so it is normal for a newly bought quartz watch to run out of electricity within a year.
Why does a fully automatic mechanical watch stop?
The fully automatic mechanical watch relies on the movement of the arm to cause the rotating surface of the automatic rotor to generate energy, which supports the daily operation of the fully automatic mechanical watch.
do. Wearing more than 8 hours a day can ensure the daily operation of the automatic watch, but it is not absolute. When the power of the automatic mechanical watch is insufficient, the watch can be wound to supplement the power of the mechanical watch to support the daily operation.
Do automatic mechanical watches need to be wound?
An automatic mechanical watch is based on a manual mechanical watch with an automatic rotor and an automatic wheel. The automatic watch has been in a stopped state before it is sold. When you get the automatic watch for the first time, it needs to be fully wound to ensure the work of the watch on the day. Just wear enough every day
Time, the automatic tuo will continuously replenish energy to the mainspring, so that the watch can work normally. Minimize manual tugging of the mainspring. Manually tugging the mainspring will drive the automatic wheel to rotate together, which will cause the automatic parts to wear out and cause unnecessary maintenance costs.
It is marked waterproof, why does it still enter the water vapor?
A waterproof watch must not get water? Of course not.
A waterproof watch does not mean that it will not get water vapor.
- When wearing the watch to take a bath, the waterproof rubber ring used for waterproofing in the watch will be accelerated by the erosion of chemicals such as detergents, and thus the waterproof effect will fail.
- During the rainy season, the humidity in the air is relatively high, and the temperature difference changes greatly, which can easily cause water vapor to enter the watch, and the same is true for saunas, air-conditioning rooms, and heating rooms.
- The rubber ring in the watch gradually ages with the passage of time, and the waterproof performance also gradually declines. The decline of the waterproof performance can easily lead to the intrusion of water vapor. In order to avoid the rust of the parts in the watch movement and the loss of the battery, it is recommended that you maintain it regularly. Love the watch and check the watch parts.